background image

All texts and images in this guide are protected by copyright and intellectual property of ENTRYA BVBA.

v1710v31

16

Overview installation codes FP070 / FP035

Description

Code

FP070

FP035

Restore factory settings

2412

Erase Memory

2499

Update Firmware

2810

User Interface Update

2811

Update Tunes

2812

Format SD-card

2813

Send adjusted namelist to other monitors

2910

Configure monitor as Master

8000

Configure monitor as Slave 1-3

8001-8003

Configure Guard monitor (8004) or deactivated (8005)

8004-8005

Video active on slaves when calling (8006) or deactivated (8007)

8006-8007

Date format: MM//DD/YYYY (8008) of DD/MM/YYYY (8009)

8008-8009

Lock output as Normally Open (8010) or Normally Closed (8011)

8010-8011

Time format: 12-Hr (8012) or 24-Hr (8013)

8012-8013

Unlocking menu active (8014) or deactivated (8015)

8014-8015

Monitor not available when BUS is active (8016) or available (8017)

8016-8017

Videoformat: Automatic (8018), PAL (8019) or NTSC (8020)

8018-8020

Unlocking time between 1-9 s

8021-8029

Indicating light will light up in red, green, blue, yellow or purple when calling

8040-8044

Indicating light will blink red, green, blue, yellow, purple or white when 

calling

8045-8050

Indicating light will blink red, green, blue, yellow, purple or white in standby

8051-8056

Indicating light is deactived

8057

Automatic recording is active (8300) or deactivated (8301)

8300-8301

Manual recording possible (8302) or deactivated (8303)

8302-8303

Unlocking time between 1-99 seconds

8401-8499

Warning during unlocking (9006: OFF, 9007: ON)

9006-9007

Tune Type (9008: Auto, 9009: Default, 9010: Reserved)

9008-9010

Start namelist from 0 (9011) or 1 (9012)

9011-9012

Touchscreen tap sounds active (9013) or deactivated (9014)

9013-9014

Intercomcall possible (9015) or deactivated (9016)

9015-9016

Configure sensibility of the touch screen

9017-9019

Hearing Aid function (T-coil) (Not available)

9020-9021

Zoomfactor when using fisheye-objective

9030-9039

Frequently Asked Questions

Visit our online shop: https://shop.seculux.be

Productpages will show manuals, faq, brochures and more

Summary of Contents for entrya Facila

















Reviews: