Oxygen 5 Digital - User Manual
Version 2.5 - 12/22/2010
Axel Technology srl
www.axeltechnology.com
|
FIRST
INSTALLATION RECOMMENDATIONS
12
FIRST INSTALLATION RECOMMENDATIONS
POWER SUPPLY CABLE
A power supply cable of approx. 2 mt length is supplied with the device, which has a moulded IEC
plug attached – this is a legal requirement.
The type of plug for the power supply depends on the country in which it is delivered.
If for any reason, you need to use this appliance with a different plug, you should use the following
wiring guidelines in replacing the exsisting plug with the new one:
Earth
Green, or green and yellow
Neutral (N)
Blue
Liv e (L)
Brown
Supply cables should be laid in such a manner that one does not step or walk on them. They should
not be squashed by any objects.
THIS EQUIPMENT MUST BE EARTHED
.
The chassis is always connected to mains earth to ensure your safety: check your mains wiring and
earthing before switching on.
AC MAINS VOLTAGE SETTING (230 V / 115 V)
BE SURE THAT THE UNIT IS SET TO THE CORRECT MAINS/LINE VOLTAGE
FOR YOUR COUNTRY BEFORE PLUGGING IT INTO THE WALL OUTLET !
The actual Mains voltage is indicated on the label stuck on the equipment closure. Should the type of
power at the operation location not be known, please contact your dealer or electricity company.
If, for some reason, the unit is to be operated at a mains input voltage which is different to that as
supplied, you need to switch the voltage selector on the right side of the unit. You also need to replace
the AC main fuse, according to information provided on the external label or on the Technical
Specifications table at the end of this user manual.
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK, ALWAYS
DISCONNECT THE AC MAINS CABLE BEFORE ALTERING THE CHANGE-OVER
SWITCH. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
