Oxygen 5 Digital - User Manual
Version 2.5 - 12/22/2010
Axel Technology srl
www.axeltechnology.com
|
Oxygen 5 Digital
Engine
29
5.5 Source configuration
The 19” rack unit can accept various I/O cards. These inserted I/O cards can accept audio in various
formats. This is because the audio connected to the I/O cards can have different channel relations
(mono, stereo). To create a user readable label you have to configure sources.
Such a source is the entity you can select to be the input of your module in the mixing console.
See below for a simple source list example:
Figure 9: Source configuration
•
Nr
Here you can reposition the destination to make the list in a convenient order.
•
Label
Name of the source you are creating.
•
Input 1/2
Here you select the physical slot and input of the card you want to assign to this source.
For mono sources you selected the same input for left and right.
•
Phantom
The phantom power for this source is turned on/off at startup.
(this field is only available when the source-phantom function is also assigned to an object;
e.g. via rack configuration)
•
Pad
The PAD for this source is turned on/off at startup.
(this field is only available when the source-phantom function is also assigned to an object;
e.g. via rack configuration)
•
Gain
The source gain for this source is at startup set to this level.
(this field is only available when the source-phantom function is also assigned to an object;
e.g. via rack configuration)
•
Processing preset
If this source is selected on a module, by the ‘source select’ function (not via module or
