Oxygen 5 Digital - User Manual
Version 2.5 - 12/22/2010
Axel Technology srl
www.axeltechnology.com
|
Oxygen 5 Digital
Engine
30
console preset), this processing preset is ‘set’ on the module.
•
Trigger start
Here you can configure how the source start/stop change is triggered:
- Dedicated, the module fader and on are not triggering start/stop only the dedicated start/stop
controllers.
- Module fader on, the fader on will trigger the start as well.
- Module on, the on switch will trigger the start as well.
- Module fader on & on, the fader must be open and on active then the start is triggered.
For all modes the start/stop may at the same time controlled by the dedicated controllers
•
Trigger stop
Here you can configure how the source start/stop change is triggered:
- Dedicated, the module fader and on are not triggering start/stop only the dedicated start/stop
controllers.
- Module fader off, the fader off will trigger the stop as well.
- Module off, the on switch will trigger the stop as well.
- Module fader off & off, the fader must be closed or on inactive then the stop is triggered.
For all modes the start/stop may at the same time controlled by the dedicated controllers
•
Red-light.
When this source becomes active on a module, the corresponding Red-light buss becomes
active.
•
Monitor destination mute
When this source becomes active on a module, the corresponding monitor buss will be muted.
•
Delete
When you click on this column the source will be deleted (and also all references are deleted).
•
Create a new source
By clicking on this link a popup will appear where you have to setup the physical inputs and
label for the new source.
