Oxygen 5 Digital - User Manual
Version 2.5 - 12/22/2010
Axel Technology srl
www.axeltechnology.com
|
Oxygen 5 Digital
Engine
32
5.7 Destination configuration
The 19” rack unit can accept various I/O cards. With these cards, you can send audio from the
Oxygen 5 Digital digital audio system to the audio format you require. Because the audio connected
to the I/O cards can have different channel relations (mono, stereo) a combination has to be made. A
user readable label has to be created to configure destinations. Such destination is the entity you can
select to be the output of a mixing buss of the mixing console. See an example destination list:
Figure 11: Destination configuration
•
Nr
Here you can reposition the destination to make the list in a convenient order.
•
Label
Name of the destination you are setting up.
•
Output 1/2
Here you select the physical slot and output of the card you want to assign to this destination.
For a mono output you have to select only one of the left or right outputs to a physical slot/ch.
•
Lev el
The destination level for this source is at startup set to this level; for example to adjust
headroom for a single output.
(this field is only available when the destination-level function is also assigned to an object;
e.g. via rack configuration)
•
Default signal from
This destination/output will send audio from the default selected source (except if a N-1 is
active, then automatically the N-1 signal is selected).
You can choose:
