Oxygen 5 Digital - User Manual
Version 2.5 - 12/22/2010
Axel Technology srl
www.axeltechnology.com
|
Oxygen 5 Digital
Engine
47
5.13 Console presets
To recall a complete console you use the console presets, what exactly is recalled is depending on the
underlying configuration of:
-
Source configuration
-
Processing presets
-
Module configuration
-
Mix/monitor buss presets
When a console preset is recalled it will set all modules to the module preset ‘A’-‘H’ as configured.
Secondly it will load the Mix/monitor preset as given in the console preset.
Figure 22: Console presets
•
Nr
Here you can reposition the preset to make the list in a convenient order.
•
Label
Name of the preset.
•
Console
Select to which console or consoles this preset is active.
•
Select module preset
Here you can select to use module preset 1A/1B, 2A/2B, 3A/3B, 4A/4B.
•
Mix/monitor buss preset
Here you can select on of the mix/monitor buss pre sets to use in this console preset.
•
Recall time
A console preset can be recalled onair safe, so active channels are not recalled. Default you
have to press the preset button for 1 second before an ‘safe’ recall is done. After pressing 3
seconds the active channels are recalled as well (forced).
You can setup the delay time for the safe and forced console presets, when you give 0
seconds the recall will be done ‘direct’ when the button is pressed.
•
Delete
When you click on this column the preset will be deleted (and also all references are deleted).
•
Create new console preset
By clicking on this link a popup will appear where you have to setup the label for the new
preset.
