AXELL D-MBR 3007-3008-PS NFPA REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
18
UMCD00013 Rev 2.2
© Axell Wireless Ltd
3.4.4 Mounting the Repeater
1. Pick up the Repeater and align the Repeaters’ four installation holes with the
Mounting Brackets’ pins.
2. Slide the brackets pins through the Repeater holes until the upper side is locked with
the installation head nuts at the top of the bracket. See Figure 3-5.
3. Release the four captive screws locking the Repeater cover.
NOTE: The NFPA unit is colored
RED
.
Figure 3-4. Loosen Captive Screws and Swing Open Door
4. Swing the top cover open.
Figure 3-5.D-MBR 3007-3008-PS-NFPA Mounted on Support Bracket
5. Set both clamps with a hex washer head screw (item 3 in Figure 3-1).
Bracket pin
Repeater
installation hole