AXELL D-MBR 3007-3008-PS NFPA REPEATER
PRODUCT DESCRIPTION AND USER’S MANUAL
36
UMCD00013 Rev 2.2
© Axell Wireless Ltd
4.5
Setting the IP Address
The Repeater supports both Static and DHCP addresses. A unique technology enables
applying both types to the
same
Ethernet port. Both addresses may enable local and
remote management.
•
Local IP Address – Static IP assigned by the user to the system. The default Static IP
address is 192.168.1.253. It is highly recommended to preserve this setup. In case
of a change, make sure you record the newly assign IP.
•
DHCP Address – address assigned by DHCP server – used for remote management
via an Ethernet connection.
To configure the IP Address
1. Click on
CMU
in the tree pane and select the
Communication Configuration
tab.
The following dialog appears.
Figure 4-7. Communication Configuration Dialog
2. To assign the unit addresses (in
IP Configuration
area):
•
Local address - in the IP Configuration area, assign the unit the IP address,
Netmask and Gateway parameters provided by your system administrator.
•
DHCP server address – checkmark the option Request Additional DHCP Address.
The assigned address can be seen in the DHCP Address field.
3. Click
Send
.
IP Address
