Change PIN
1.
2. Select the
Settings tab followed by Management - Miscellaneous.
3. Enter a
New PIN, end by pressing Set.
Change IP address
1.
2. Select the
Settings tab followed by Network - IP Configuration.
3. Enter the desired IP address,
DNS must be entered
. End by pressing
Set.
Add hand sets over the internet.
1.
2. Select the
Settings tab followed by Telephony - Connections,
3. Click on
Edit on one of the six extensions to which the hand set should be
configured to.
4. Enter the
in
Connection Name or Number and
Authentication Name.
5. Enter
ax
, followed by the
extension number
in
Authentication password.
For example,
ax111
.
6. Click on
Set to save.
7. Click on
Show Advanced Settings.
8. Enter the
C10 IP address
, factory set to
10.0.0.51
in
Domain and
Registration server.
9. Select
Never on Outbound proxy mode.
10. Repeat steps 3-9 for each extension that are to be connected to a hand set.
5 (8)
Manual N510 and C620H
