11. Save by clicking on
Set.
Sometimes a second click has to be made
to save the last extension.
The extension is saved when
Status
shows
Registered.
The extensions has to be entered in VAKA and each base station support up
to six extensions.
One extension can handle multiple hand sets.
Register a name to an extension number
1.
2. Select the
Settings tab followed by Telephony - Number Assignment
3. Enter a name for the corresponding hand set. The name will be shown in the
hand sets' displays.
4. Make sure
incoming- and outgoing calls are only marked for corresponding
extension number.
Blocking internal calls
1.
2. Select the
Settings tab and then Telephony - Dialing Plans.
3. Check
Active for all numbers that should be blocked from making internal
calls.
Configuring the C10 module
1. Log in to the VAKA software.
2. Select
Settings - Intercom - Network & Connections.
3. Activate
Allow the use of a local SIP server.
4. Click on
Save.
6 (8)
Manual N510 and C620H
