5. From the VAKA main menu, select
Users and select an organization group.
6. Enter the
extension number
in the
phone number field.
The organization group can be
called
from the
name list
in compatible readers
or with B followed by the
quick dial number
or
extension number
.
Factory reset
Method 1
1.
2. Select the
Settings tab followed by Management - Reboot and Reset.
Method 2
1. Disconnect power to the base station and remove the network cable.
2. Hold the blue button and supply power.
3. Hold the button until it starts flashing
4. Connect the base station to a DHCP server to assign it an
Before you call technical support
l
In order for the hand set to display that an incoming call is from the VAKA
intercom, its number has to be added in the phone book. The factory default
number is
99
. The phone book is accessed by pressing
down
on the
navigation button
.
Technical Data
Base power consumption
In standby mode: approx. 1.2 W. During a call:
approx 1.3 W
Interfaces
Ethernet
DECT standard
Supported
GAP standard
Supported
No. of channels
60 duplex channels
7 (8)
Manual N510 and C620H
