Introduction
Axema VAKA quick guide is used to configure a VAKA system in which all users
always have access to all doors.
Complete documentation is available at
. (English documentation
available)
Connect to VAKA
VAKA is accessed by navigating to the connection point IP address or domain
name, for example,
10.0.0.201
or
10.0.0.101 (B60 LAN)
. Please note that
B60 has different IP addresses on the LAN and WAN side.
VAKA
Log in credentials
Username
admin
Password
password
The first time the credentials are used, an
installer account
will be created and
the second time an
administrator account
will be created.
Installing devices (Controllers, readers
etc.)
Hardware can be installed automatically or manually.
Automatic installation
1. Click on the dialogue bubble that says
New hardware detected
.
2. Select the devices that should be installed and click on
Install
.
3. Follow the instructions in VAKA.
3 (4)
Quick guide VAKA 3.70
