18
8.3 Cautions
1. The ceramic cooker hob must be installed by qualified personnel or technicians. We have
professionalsat your service. Please never conduct the operation by yourself.
2. The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
3. The ceramic cooker hob shall be installed such that better heat radiation can be ensured to enhanceits
reliability.
4. The wall and induced heating zone above the work surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
8.4 Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard,or a single-pole
circuitbreaker. The method of connection is shown below.
1. If the cable is damaged or needs replacing, this should be done by an after-sales technician using
theproper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must
beinstalled with a minimum gap of 3mm between the contacts.
3. The installer must ensure that the correct electrical connection has been made and that it complieswith
safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by a properly qualified person.
