6: S
ho
w P
ro
fil
es •
9
4
©2016 Axia Audio- Rev 1.8.1
•
EQ HIGH GAIN / EQ MID GAIN / EQ LOW GAIN:
dial in boost or cut for the three EQ bands, or
Retain
Source Setting.
Note: For details on Element EQ operations,
please refer to Chapter 3: Working With
Sources
•
ASSIGN TO PGM1/2/3/4 and AUX A /B/C/D:
Checking
ON
for any of these buses assigns the fader
to that bus when the Show Profile is loaded. You can
also choose
OFF
or
Retain Source Settings.
•
AUX A / AUX B / AUX C / AUX D PRE/POST
FADER:
Allows you to send this fader’s source to the
specified Aux Send bus either
Pre-Fader
or
Post-
Fader,
or
Retain Source Settings.
•
AUX SEND A/B/C/D GAIN:
Turn this channel’s
feed to the specified Aux Send bus
Off,
specify up
to 10 dB of boost or 25 dB of cut, or
Retain Source
Settings.
•
NOISE GATE STATUS:
Turns the Noise Gate in the
Omnia Dynamics Processing on and off. Specify
Active
or
Bypass
, or choose
Retain Source Set-
ting.
(Only applies to Mic sources.)
•
COMPRESSOR STATUS:
Turns the compressor in
the Omnia Dynamics Processing on and off. Specify
Active
or
Bypass
, or choose
Retain Source Set-
ting.
(Only applies to Mic sources.)
•
DE-ESSER STATUS:
Turns the de-essing function
in the Omnia Dynamics Processing on and off. Spec-
ify
Active
or
Bypass
, or choose
Retain Source
Setting.
(Only applies to Mic sources.)
•
NOISE GATE THRESHOLD:
Determines the point
at which the Noise Gate will operate (if set to
Ac-
tive
). Adjustment range is between 0dB and -50dB,
or
Retain Source Settings
.
•
NOISE GATE DEPTH:
Sets the amount of noise
reduction that will be applied to the mic audio if
the noise gate is set to
Active
and the Noise Gate
Threshold is reached. Adjustment range is between
0dB and -30 dB, or
Retain Source Settings
.
•
COMPRESSOR THRESHOLD:
Determines the
point at which the Compressor will operate (if set
to
Active
). Adjustment range is between 0dB and
-30dB, or
Retain Source Settings
.
•
COMPRESSOR RATIO:
Sets the amount of com-
pression that will be applied to the mic audio. Ad-
justment range is between 1:1 and 16:1, or
Retain
Source Settings
.
•
DE-ESSER THRESHOLD:
Determines the point at
which the Compressor will operate (if set to
Active
).
Adjustment range is between 0dB and -20dB, or
Re-
tain Source Settings
.
•
DE-ESSER RATIO:
Sets how aggressively the de-
esser will remove sibilance from the mic audio. Ad-
justment range is between 1:1 and 8:1, or
Retain
Source Settings
.
•
COMPRESSOR MODE:
Change the voice compres-
sor between
Freeze
and
No Freeze
modes, or
Re-
tain Source Settings
.
•
POST-PROCESSING TRIM GAIN:
Specify a value
in the range of +/-20 dB that will be applied after
the processing block. This may compensate got pro-
cessing gain losses. You may also choose to
Retain
Source Setting.
•
BACKWARD FEED DIM GAIN:
Set how much the
program audio being fed back to this source will be
dimmed when the source is being talked to using
the
Talkback
feature. Adjustment range is 0dB to
-30dB, or
Retain Existing Setting.
Setting this to
OFF
will mute the program audio backfeed during
Talkback,
•
CHANNEL ON/OFF STATUS:
Allows you to turn
fader
On
or
Off
when the Show Profile is loaded.
