USA Class A Computing Device
Information To User. Warning:
This equipment generates, uses, and can radiate ra-
dio-frequency energy. If it is not installed and used
as directed by this manual, it may cause interference
to radio communication. This equipment complies
with the limits for a Class A computing device, as
specified by FCC Rules, Part 15, Subpart J, which
are designed to provide reasonable protection against
such interference when this type of equipment is op-
erated in a commercial environment. Operation of
this equipment in a residential area is likely to cause
interference. If it does, the user will be required to
eliminate the interference at the user’s expense.
NOTE: Objectionable interference to TV or radio re-
ception can occur if other devices are connected to
this device without the use of shielded interconnect
cables. FCC rules require the use of only shielded
cables.
Canada Warning:
“This digital apparatus does not exceed the Class A
limits for radio noise emissions set out in the Radio
Interference Regulations of the Canadian Depart-
ment of Communications.” “Le present appareil nu-
merique n’emet pas de bruits radioelectriques depas-
sant les limites applicables aux appareils numeriques
(de les Class A) prescrites dans le Reglement sur le
brouillage radioelectrique edicte par le ministere des
Communications du Canada.”
CE Conformance Information:
This device complies with the requirements of the
EEC Council Directives: 93/68/EEC (CE Marking);
73/23/EEC (Safety – low voltage directive); 89/336/
EEC (electromagnetic compatibility). Conformity is
declared to those standards: EN50081-1, EN50082-1.
Important Safety Information
To prevent risk of electric shock: Disconnect power
cord before servicing. If fuse replacement is required,
please note: For continued protection against fire, re-
place fuse only with same type and value.
Caution
The installation and servicing instructions in the
manual are for use by qualified personnel only. To
avoid Electric Shock, do not perform any servicing
other than that contained in the operating instruc-
tions unless you are qualified to do so. Refer all ser-
vicing to qualified personnel.
Electrical Warning
To reduce the risk of electrical shock, do not expose
this product to rain or moisture. Keep liquids away
from the ventilation openings in the top and rear of
the unit. Do not shower or bathe with the unit.
This equipment is designed to be operated from a
power source that includes a third “grounding” con-
nection in addition to the power leads. Do not defeat
this safety feature. In addition to creating a potential-
ly hazardous situation, defeating this safety ground
will prevent the internal line noise filter from func-
tioning.
Ventilation Warning
The Axia PowerStation, StudioEngine and Power
Supply/GPIO Nodes require the free flow of air for
adequate cooling. Do not block the ventilation open-
ings in the top and rear of the unit. PowerStation,
StudioEngine and the Power Supply/GPIO Node
must be mounted with a blank rack spacer above or
damage may occur.
Failure to allow proper ventilation could damage the
unit or create a fire hazard. Do not place the unit on
a carpet, bedding, or other materials that could inter-
fere with the rear and top panel ventilation openings.
