3: C
on
fig
uri
ng I
np
ut
s •
3
3
©2016 Axia Audio- Rev 1.8.1
may be turned ON or OFF at will.
Element supports both US and Euro modes. The
next few settings are used for setting up the
desired style of phone operation.
Figure 3-3: Settings for configuring Element for
operation with Telos phone systems
Note: For complete instructions on how to use
thes options when setting up a phone system
with Element, please refer to Appendix D:
Working With Phone Hybrids.
Figure 3-4: More Source Profile Settings
•
PREVIEW ROUTING:
Determines where the
Pre-
view
signal originates.
»
Pre-fader listen
is the legacy CUE function
that most broadcasters use.
»
After-fader listen (SOLO)
is preferred by
some users and is selected here.
•
PREVIEW SWITCHING MODE:
Determines what
will happen to a source’s off-air
Preview
assign-
ment when that source is taken to air.
»
Normal, Auto-Switching Disabled:
The
Pre-
view
bus assignment will be retained even after
the fader is turned
ON.
»
CHANNEL ON turns Preview OFF:
If this
source is assigned to
Preview
for off-air audi-
tioning, turning its channel
ON
will cancel its
Preview
assignment.
»
Preview ON turns Channel OFF:
Does just
what it says - sometimes used for Phone channels.
•
HYBRID ANSWER MODE:
This setting allows you
to tailor Element’s Hybrid Answer mode to suit your
facility’s operating style. It is intended for hybrids
that use external GPIO for device control.
»
Normal, Auto Answer Disabled:
Element pro-
vides no auto-answer logic when a fader with a
hybrid assigned is turned
On.
»
Channel ON Answers Hybrid:
When a hybrid
has an incoming call, turning its assigned fader
ON
will answer the call.
»
Channel ON or Preview ON Answers Hy-
brid:
When a hybrid has an incoming call, turn-
ing its assigned fader
ON
or pressing that chan-
nel’s
Preview
key will answer the call.
•
Knob Function:
Allows you to specify the func-
tion of a SoftKnob that can be used for tweaking the
channel gain structure. The SoftKnob is accessed by
pressing the
Options
button on the fader channel.
»
None -
disables this function
»
Fader Trim Level -
adjusts trim gain in the
channel’s signal path just before the channel
fader.
»
Pre-Amp Gain -
adjusts the source gain of the
Axia node or PowerStation I/O source associated
with this source.
•
BACKWARD FEED ENABLED/DISABLED:
Al-
lows you to enable or disable backfeeds to this audio
