background image

S

pe

ci

fic

at

io

ns & W

ar

ra

nt

y • 4

3

Version 1.2  July 2010

Axia Limited Warranty 

This Warranty covers “the Products,” which are defined as the various audio equipment, parts, software and acces-

sories manufactured, sold and/or distributed by TLS Corp., d/b/a Axia Audio (hereinafter “Axia Audio”).

With the exception of software-only items, the Products are warranted to be free from defects in material and 

workmanship for a period of five (5) years from the date of receipt by the end-user. Software-only items are warranted 
to be free from defects in material and workmanship for a period of 90 days from the date of receipt by the end-user.

This warranty is void if the Product is subject to Acts of God, including (without limitation) lightning; improper 

installation or misuse, including (without limitation) the failure to use telephone and power line surge protection de-
vices; accident; neglect or damage.

EXCEPT FOR THE ABOVE-STATED WARRANTY, AXIA AUDIO MAKES NO WARRANTIES, EXPRESS 

OR IMPLIED (INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE).

In no event will Axia Audio, its employees, agents or authorized dealers be liable for incidental or consequential 

damages, or for loss, damage, or expense directly or indirectly arising from the use of any Product or the inability to 
use any Product either separately or in combination with other equipment or materials, or from any other cause.

In order to invoke this Warranty, notice of a warranty claim must be received by Axia Audio within the above-stated 

warranty period and warranty coverage must be authorized by Axia Audio. If Axia Audio authorizes the performance 
of warranty service, the defective Product must be delivered, shipping prepaid, to: Axia Audio, 1241 Superior Avenue, 
Cleveland, Ohio 44114.

Axia Audio at its option will either repair or replace the Product and such action shall be the full extent of Axia 

Audio’s obligation under this Warranty. After the Product is repaired or replaced, Axia Audio will return it to the party 
that sent the Product and Axia Audio will pay for the cost of shipping.

Axia Audio’s authorized dealers are not authorized to assume for Axia Audio any additional obligations or liabili-

ties in connection with the dealers’ sale of the Products.

Axia Audio’s products are to be used with registered protective interface devices which satisfy regulatory require-

ments in their country of use.

 

Summary of Contents for IP-Intercom System





















































Reviews: