Page 11 of 24
Axicon Auto ID Limited | PV-1000 operating manual | January 2022
www.axicon.com
Setting date and time
The PV-1000 has its own clock, so the user scan set the date and time which will be
recorded with each record.
To set the date and time, press the
Menu/Select
button to see the message
►
Information
Use the
Scroll Down
button until
►
Setup
is displayed.
Press
Menu/Select
Press the
Scroll Down
button until
►
Time
is displayed
Press
Menu/Select
The Verifier will show
♦
Time Zone
If the Time Zone is to be changed then press
Menu/Select
and use the
Scroll up
and
Scroll Down
buttons until the correct time zone is shown and then press
Menu/
Select
to lock the data.
Use the
Scroll Down
button and
♦
Time
will be displayed.
Press
Menu/Select
Use the
Scroll up
and
Scroll Down
buttons until the correct time is shown and then
press
Menu/Select
to lock the data.
Use the
Scroll Down
button and
♦
Date
will be displayed.
Press
Menu/Select
Use the
Scroll up
and
Scroll Down
buttons until the correct time is shown and then
press
Menu/Select
to lock the data.
Press
Clear/Back
until the
Ready to Scan !
message is shown
Please note that the date and time are maintained by a built-in battery that has
an estimated life span of four years. It is not possible for the user to change the
battery, so the PV-1000 should be returned to Axicon for servicing when this fails.
Configuration set-up
