Programming of the output channel
The modulator "AVM" is switched on with the power switch on the rear
side of the device. Press SET for 3 seconds, until LED starts blinking. Now
press "+" or "-" until you reach the selected channel. The LED stops
blinking after about 3 seconds, and theselected channel is adjusted.
SET button
POWER switch
LED-
Display
Field of application and product discription
The devices are suited only for distributing radio and television signals in the
house! If the device is used for other purposes, no warranty is given!
The Audio/Video Modulator modulates an A/V signal in a RF channel to connect
to a television set or to feed a small house network.
At the input one may connect a CCD camera, a VCR, a DVD player or a similar
item. In this way a children´s room, a house entrance or another sensitive area
can be monitored.
With easy programming steps, a channel, which is not used for TV-transmission,
can be selected to transmit the signal from the input source.
Mounting:
Use the mounting screws included in the delivery and the mounting holes of
the devices 1.
e.g. through AVM 2-01/AVM 2-02
e.g. through splitter
1
1
Signal feeding
audio level video level
e.g. through multiswitch
