2021-03-17 | Technical improvements, changes in design, printing- and other errors reserved.
27
Consider port EoC as the network backbone of EP. DownRate states for downstream rate from Master to EP,
and UpRate is the upstream rate from EP to Master. The maximum allowed rate should be the setting value
multiplied by 64Kbps.
Rate Limit per Port
EP individual port may be throttling independently if preferred.
3.9.5. QoS (G.hn:QoS)
Same as NMU QoS settings.
3.9.6. VLAN (G.hn:VLAN)
Enable the 802.1Q Tag VLAN function and setup the values in field ‘
VID
’ and ‘
Priority
’. VID range is 1~4095
and Priority is 0~7.
Ingress Rule (In Rule)
Accept All (all): accept all incoming packets, either tagged or not.
VID-Matched(tag): accept only incoming tagged packet with matched VID, reject other incoming packet.
Egress Rule (Out Rule)
Untag: untag all outgoing packets.
Tag: tag all outgoing packets with incoming port's VID/Priority.
Bypass: keep outgoing packets untainted, either tagged or not while incoming.
Regard port EoC as the network trunk. Once Tag VLAN is enabled, by default port LAN1 and port EoC are set to
the same VLAN; also port LAN2 and port EoC and port EoC; also port WiFi and port EoC. Port LAN1/LAN2/WiFi
is within the same VLAN if be assigned with same VID.
