Operation Instructions | EoC 20-01 | Ethernet over Coax | Master
6
2021-03-17 | Technical improvements, changes in design, printing- and other errors reserved.
1.1.1. Compatibility
When selecting devices, make sure that they are compatible with each other.
EoC
1-11
EoC
2-11 EoC
20-01 EoC
20-02 EoC
1-01 EoC
2-01 EoC
10-01 EoC
10-02
Cu
rr
en
td
ev
ic
es
EoC 1-11
X
X
X
X
X
X
EoC 2-11
X
X
X
X
X
X
EoC 20-01
X
X
X
X
X
X
X
EoC 20-02
X
X
X
X
X
X
X
Ex
pi
re
d
de
vi
ce
s
EoC 1-01
X
X
X
X
X
X
EoC 2-01
X
X
X
X
X
X
EoC 10-01
X
X
X
X
X
X
X
EoC 10-02
X
X
X
X
X
X
X
= compatible
X = not compatible
1.2. Scope of delivery
∂
EoC 20-01
∂
CAT5 ethernet cable
Connects from LAN port to Internet modem
∂
DC12V power adapter for power supply
1.3. Features
∂
One TV/Antenna port for TV Set Connection or for TV Signal from VHF/UHF Antenna/CATV
∂
Two Gigabit Ethernet Ports with Auto-Detect MDIX Function(Auto Crossover) and Auto-Negotiating
Half/Full Duplex 100M/1000Mbps
∂
Built-in Power over Ethernet(PoE) Powered Device(PD) Function in One Ethernet Port
∂
One Small Form-Factor Pluggable(SFP) Socket for Expansion to FTTx or PON
∂
One Rocker Switch to Select either Local or Line Power Mode
∂
One Reset Button
∂
Built-in Network Management Unit(NMU) and EoC Master
∂
One EoC Master that Supports up to 31 EP
∂
Built-in On-line Diagnostic Function for Individual EP Connection SNR(Signal to Noise Ratio), CFR(Channel
Frequency Response), and PE(Payload Encoding equals Carrier Speed in Mbps).
∂
Supports Dual Stack IPv4/IPv6
∂
Priority Queue based QoS(Quality of Service) Support for 802.1p, IP TOS/TC or DSCP, UDP/TCP Protocols
∂
Built-in Web/Telnet Server to Support Remote Configuration
∂
Supports Remote HTTP/TFTP Upgrade Function for System NMU Firmware, EoC Master/EP Driver and EP
WiFi Driver
∂
Supports NMU/Master/EP Auto-Configuration via Built-in TFTP/DHCP Client
∂
Supports DHCP/IGMPv2 Snooping for Host at EP
∂
Supports SNMP Function
