Furnace
Furnace/Heat Pump On
Generator must be running for heat
pump to operate.
Turn ON the AC Unit Breaker on the
Main DC panel.
Set thermostat to desired
temperature.
The thermostat for the unit is on the
main hallway wall near fridge.
The fan will come on and run for 2-5
minutes before you feel heat come
out of the vents.
Furnace Off
At thermostat, move white switch at
button to OFF.
Turn OFF AC Unite breaker at Main
DC panel.
The fan will continue to run for 2-3
minutes after you have shut down
the heating system.
COMMON TROUBLESHOOTING
Problem
Possible Causes
Remedies
Heater won’t turn on
DC main is Off
AC Unit breaker is
Off
Thermostat is off
Low Battery
Generator is off
Turn on DC MAIN
Turn on the
HEATER breaker
Turn on the thermostat
Change the battery
Turn generator on
O.05
HEAT
1