Engines/Helm
Once the "TRANSFER" button
is pressed, the transfer LED will
light up and one beep will
sound. Press the "TRANSFER"
button again to complete the
helm transformation. When helm
transformation is complete,
another beep will sound and the
transfer LED will turn off.
NOTE: There is a 10 second
time frame to complete a helm
transfer. If the helm transfer is
not completed, the action will be
cancelled and a double beep will
sound. Pressing the
"TRANSFER" button again will
re-initiate a helm transfer.
Synchronizing Engines
The auto synchronizing feature,
when engaged, will
automatically adjust all engine
speeds to match the speed of
the starboard engine. Press the
"SYNC" button on the CAN
trackpad to turn auto
synchronization on or off. When
the sync LED is yellow, the
"SYNC" button has been pressed,
but the conditions are not right for
auto synchronization to engage.
When the sync LED turns red,
engine synchronization has been
engaged. The engines will remain
synchronized as long as engine
speed is over 900 RPM for two
seconds, remote control handles are
positioned within 10% of each other,
and the engines are below 95%
throttle opening. To disengage the
auto synchronization feature, press
the "SYNC"
button.
Don’t Drive From The Upper Deck:
In any wakeless area, including the
marina.
When approaching a dock.
When approaching a beach.
In narrow channels.
In any situation that requires
maneuvering your vessel, always pilot
from the main helm.
Note: Do not try to start the engines from the
upper helm
COMMON TROUBLESHOOTING
Problem
Possible Causes
Remedies
Engine doesn’t turn over
Is the throttle in neutral
Put throttle in neutral
Engine turns over but
won't start
Out of Fuel
Check VesselView fuel
gauge for fuel level.
O.05
ENGINE - 4