UMAX141100 Version 1.0.6.
Preliminary Documentation – May be subject to change
A-1
APPENDIX A - TECHNICAL SPECIFICATION
Technical Specifications:
Specifications are indicative and subject to change. Actual performance will vary depending on the application and operating conditions. Users
should satisfy themselves that the product is suitable for use in the intended application. All our products carry a limited warranty against defects in
material and workmanship. Please refer to our Warranty, Application Approvals/Limitations and Return Materials Process as described on
www.axiomatic.com/service.html.
Power Supply Input - Nominal
12Vdc or 24Vdc nominal (8…60 VDC power supply range)
Load dump protection is provided.
Protection Reverse
polarity
protection is provided.
Overvoltage protection up to 88V is provided.
CAN
SAE J1939, 250 kbps Baud Rate
Bluetooth
Dual-Mode Bluetooth V4.0 with classic Bluetooth
Connection Range*: Up to 50 m (164 ft.)
Operating Range*: Up to 150 m (492 ft.) @ 13 dbm (Class 1)
Serial Port Profile (SPP)
Internal antenna
*
Range depends on the operating environment and actual results may vary.
Microprocessor STM32F407VGT7
32-bit, 1024 Kbit program flash
RTC
Real Time Clock back up power
96 hours
4 Gbit Flash Memory
Quiescent Current
15 mA @ 24Vdc Typical
LED Indicator
User configurable to react to different events or faults
Control Logic
User programmable functionality
User Interface
CAN2BT Configuration and BT MAP Tool applications are available from Google
Play.
https://play.google.com/store/apps/details?id=com.axiomatic.can2btconfiguration
https://play.google.com/store/apps/details?id=com.axiomatic.btmaptool
Network Termination
It is necessary to terminate the network with external termination resistors. The
resistors are 120 Ohm, 0.25W minimum, metal film or similar type. They should be
placed between CAN_H and CAN_L terminals at both ends of the network.
Operating Conditions
-30 to 85
C (-22 to 185
F)
Enclosure
Molded Enclosure, integral connector
Nylon 6/6, 30% glass
Ultrasonically welded
3.47 x 2.75 x 1.31 inches (88.2 x 70.0 x 33.3 mm)
L x W x H including integral connector
Refer to the dimensional drawing in Installation Instructions.
Electrical Connections
Integral TE Deutsch 8 pin receptacle (P/N: DT04-08PA)
18 AWG wire is recommended for use with contacts 0462-201-16141.
For Pin Out refer to Installation Instructions.
A mating plug kit is available. Ordering P/N:
AX070112 i
s comprised of 1 DT06-
08SA, 1 W8S, 8 0462-201-16141, and 3 114017.
Protection IP67
Vibration Pending
MIL-STD-202G, Method 204D test condition C (Sine)
and Method 214A, test condition B (Random)
10 g peak (Sine)
7.68 Grms peak (Random)
Shock Pending
MIL- STD-202G, Method 213B, test condition A
50g (half sine pulse, 9ms long, 8 per axis)
Approvals
CE marking
Weight
0.15 lb. (0.06 kg)
