AX-3003P AX-6003P
1. Use of Operation Manual
Please read through and understand this Operation Manual
before operating the product. After reading, always keep the
manual nearby so that you may refer to it as needed. When
moving the product to another location, be sure to bring the
manual as well.
2. Safety instructions
2.1. Safety Terms and Symbols
This chapter contains important safety instructions that you
must follow when operating the instrument and when keep-
ing it in storage. Read the following before any operation
to insure your safety and to keep the best condition for the
instrument.
The following safety symbols may appear in this manual or
on the instrument:
WARNING - Identifies conditions or practices that could
result in injury or loss of life.
CAUTION - Identifies conditions or practices that could
result in damage to the instrument or to other properties.
DANGER - High voltage
ATTENTION - Refer to the manual
Earth (ground) terminal
Protective conductor terminal
2.2. Safety Guidelines
•
Before plugging into local AC mains, check and make
sure that the output voltage is compatible to the load. (It
is suggested to disconnect a load before plugging into
local AC mains.
•
Do not use this instrument near water.
•
Do not operate or touch this instrument with wet hands.
•
Do not open the casing of the instrument when it is
connected to AC mains.
•
The max.output voltage of the instrument may be over
60VDC, avoid touch the metal contact part of the output
terminals.
