Brick ----- 0.90
Carbon ----- 0.85
Ceramic ----- 0.95
Concrete ----- 0.95
Copper ----- 0.95
Dirt ----- 0.94
Frozen food ----- 0.90
Hot food ----- 0.93
Glass(plate) ----- 0.85
Ice ----- 0.98
Iran ----- 0.70
Lead ----- 0.50
Limestone ----- 0.98
Oil ----- 0.94
Paint ----- 0.93
Paper ----- 0.95
Plastic ----- 0.95
Rubber ----- 0.95
Sand ----- 0.90
Skin ----- 0.98
Snow ----- 0.90
Steel ----- 0.80
Textiles ----- 0.94
Water ----- 0.93
Wood ----- 0.94
6. Operation
1. Fast measurement:
1) Open the battery door and insert a 9V battery properly.
2) Pull the trigger to turn on the unit;
3) Aim at the target surface with the laser and pull the trigger (If you do not need laser aiming, you can
turn it off), then temperature will be shown on the LCD after you release the trigger.
2. Locating a Hot Spot
Scan across with an up and down motion when you pull the trigger until you locate the hot spot. You can
refer below picture.
