GOT-812 Series User’s Manual
Drivers Installation
56
4.2 Touch
Screen
The GOT-812 uses the 5-wire analog resistve. There are the
specification and driver installation which are listed below.
4.2.1 Specification
Touch Screen
5-wire Analog Resistive type
Touch Screen Controller
PenMount 6000 USB
Touch Screen Controller IC
Communications
USB interface
Baud Rate
19200 baud rate fixed
Resolution
1024 x 1024 (10 bit A/D converter inside)
Power Input
5V
Power Consumption
Active: 24.6mA / Idle Mode: 13.4mA
4.2.2 Driver Installation- Windows XP
The GOT-812 Series provides a touch screen driver that users can
install it under the operating system Windows XP. To facilitate
installation of the touch screen driver, you should read the instructions
in this chapter carefully before you attempt installation.
1.
Insert Driver CD and follow the path to select the “\
Driver\XP\Step 5 - Touch”.
Summary of Contents for GOT-812 Series
