NA580 Series User
’s Manual
Introduction
7
Transfer Rate for LAN port
The double-color LED light indicates 10/100/1000Mbps transfer rate.
LED Light Color
Transfer Rate
Dark
10Mbps
Green
100Mbps
Orange
1000Mbps
If the LED is dark and Active/Link LED is lighting on flashing, the transfer rate
should be 10Mbps.
When the green-color LED light is radiating, the transfer rate should be
100Mbps.
When the orange-color LED light is radiating, the transfer rate should be
1000Mbps.
When this LED and Link/Active LED both are dark, no networking devices are
attached.
Active/Link LED for LAN Port
The orange LED is on when the LAN port connection is working.
The LED flashes when transmitting or receiving any signals to or from the
appliance.
The LED is dark when the appliance is off.
Note:
Optional LAN module LED definition in Appendix C.
Summary of Contents for NA580 series
