SBC84831 All-In-One Capa Board User’s Manual
AMI BIOS Setup Utility
54
(2)
¾
Clear NVRAM
Use this item to clear the data in the NVRAM (CMOS).
Here are the options for your selection,
No
and
Yes
.
¾
Plug & Play O/S
When the setting is No, Use this item to configure all
the devices in the system. When the setting is Yes and
if you install a Plug and Play operating system, the
operating system configures the Plug and Play
devices not required for boot. The default setting is
No
.
¾
PCI Latency Timer
This item controls how long a PCI device can hold the
PCI bus before another takes over. The longer the
latency, the longer the PCI device can retain control of
the bus before handing it over to another PCI device.
There are several options for your selection.
¾
Allocate IRQ to PCI VGA
This item allows BIOS to choose an IRQ to assign for
the PCI VGA card. Here are the options for your
Summary of Contents for SBC84831 Series
