Configuration Menu
Select the previous menu.
Select the next menu.
Enter the selected menu.
8
User Manual
1
2
3
Cfg. Menu
◄► Calibration
1
2
3
Cfg. Menu
◄► Calibration
Cfg. Menu
◄► Burn in
Cfg. Menu
◄► Settings
Cfg. Menu
◄► Information
Cfg. Menu
◄► Main
Audio Menu
This menu enables audio visualization on the display modules. The system samples the
stereo audio input signal and visualizes the frequency bands on the connected displays.
The display connected to the left port visualizes the left audio channel, the display
connected to the right port visualizes the right audio channel. The audio input signal
comes from the audio input or the built-in microphone.
Reinitialize the left display.
Reinitialize the right display.
Go to the next screen.
This is the entry screen of the audio menu. It shows which display modules are
connected. You can reinitialize a display module by pressing the corresponding button.
Cycle through the group of RGB animation types:
WAVE
►
SOLID
►
SPECTRUM
Select the next RGB animation.
Go to the next screen.
Here you can change the RGB animation on the display modules.
The spectrum animation is exclusively available in the audio menu. It animates the RGB
LEDs based on the sampled audio signal.
Exit to the main menu.
Put the system in sleep mode. Press any button to wake up.
Go to the first screen.
Here you can exit to the main menu, put the system to sleep or go back to the entry
screen.
User Manual
5
Audio
IV-26 IN-13 ►
Audio
SOLID 24 ►
Audio
EXIT SLEEP ►
1
2
3
Audio
IV-26 IN-13 ►
1
2
3
1
2
3
Audio
EXIT SLEEP ►
1
2
3
1
2
3
Audio
SOLID 24 ►
1
2
3
