Axis 02241-001 Installation Manual Download

Page: 4 / 118

Legal considerations

Video and audio surveillance can be regulated by laws
that vary from country to country. Check the laws

in your local region before using this product for
surveillance purposes.

Liability

Every care has been taken in the preparation of this
document. Please inform your local Axis office of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.

Intellectual property rights

Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at

axis.com/patent

and one or more

additional patents or pending patent applications in
the US and other countries.

Equipment modifications

This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate all
applicable regulatory certifications and approvals.

Trademark acknowledgements

AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX
are registered trademarks of Axis AB in various
jurisdictions. All other trademarks are the property
of their respective owners.

Regulatory information

Europe

This product complies with the applicable CE marking
directives and harmonized standards:

•

Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See

Electromagnetic compatibility

(EMC) on page 4

•

Low Voltage Directive (LVD) 2014/35/EU. See

Safety on page 5

•

Restriction of Hazardous Substances (RoHS)
Directive 2011/65/EU and 2015/863, including
any amendments, updates or replacements. See

Disposal and recycling on page 5

A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See

Contact information on page 5

Electromagnetic compatibility (EMC)

This equipment has been designed and tested to fulfill
applicable standards for:

•

Radio frequency emission when installed
according to the instructions and used in its
intended environment.

•

Immunity to electrical and electromagnetic
phenomena when installed according to the
instructions and used in its intended environment.

USA

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.

This device may not cause harmful interference,
and

this device must accept any interference received,

including interference that may cause undesired
operation.

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment
and receiver.

•

Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.

•

Consult the dealer or an experienced radio/TV
technician for help.

The product shall be properly grounded.

Contact information

Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000

Canada

This digital apparatus complies with
CAN ICES-3 (Class B). The product shall be
properly grounded. Cet appareil numérique est
conforme à la norme CAN NMB-3 (classe B). Le produit
doit être correctement mis à la terre.

Europe

This digital equipment fulfills the requirements for RF
emission according to the Class B limit of EN 55032.
The product shall be properly grounded.

Australia/New Zealand

This digital equipment fulfills the requirements
for RF emission according to the Class B limit of
AS/NZS CISPR 32. The product shall be properly
grounded.

Japan

この装置は、クラスB機器です。この装置は、

住宅環境で使⽤することを⽬的としています
が、この装置がラジオやテレビジョン受信機
に近接して使⽤されると、受信障害を引き起