10
Installing the AXIS 231D/232D
Manual Installation using ARP and Ping in Windows
Assign your product with a unique IP address from a computer on your network, as
follows:
1. Acquire an unused IP address for the AXIS 231D/232D from your network
administrator.
2. Connect a standard network cable to your AXIS 231D/232D and connect it to the
network.
3. Locate the serial number/MAC Address (S/N) found on the label on the AXIS
231D/232D.
4. From a computer on your network, open a Command Prompt, i.e. from the Windows
Start
menu, select
Run...
and type
cmd
in the field. Click
OK
.
5. Enter the commands:
Syntax:
Example
6. Connect the power to the AXIS 231D/232D.
7. When ‘Reply from 192.168.0.125: ...’ is displayed (approximately 10-15 seconds),
type
Ctrl+C
to close the ARP Ping session.
8. Start a Web browser and enter the IP address in the Address/Location field.
9. Press
Enter
.
10.Enter a new password for the
root
user (administrator).
11. If required, accept the installation of
AMC
onto your workstation. See
AXIS Media
Control (AMC)
, on page 8 for more information.
12.The installation is now complete.
If you need additional information, refer to the AXIS 231D/232D User’s Manual which is
available from the Axis web site at http://www.axis.com
arp -s <IP address> <MAC address>
ping -l 408 -t <IP address>
Note: The ping command is
followed by -l (lower case L)
Summary of Contents for 231D
Page 45: ...Installazione di AXIS 231D 232D 45 ITALIANO ...
Page 46: ......
