Installing the AXIS 231D/232D
11
EN
GL
ISH
Manual Installation using ARP and Ping in UNIX/Linux
Assign your product with a unique IP address from a computer on your network, as
follows:
1. Acquire an unused IP address for the AXIS 231D/232D from your network
administrator.
2. Connect a standard network cable to your AXIS 231D/232D and connect it to the
network.
3. Locate the serial number/MAC Address (S/N) found on the label on the AXIS
231D/232D.
4. Connect the power to the AXIS 231D/232D.
5. Once ‘Reply from 192.168.0.125: ...’ (or similar) is displayed (approximately 10-15
seconds), type CTRL+C to close the ARP Ping session.
6. Start a Web browser and enter the IP address in the Address/Location field.
7. Press
Enter
.
8. Enter a new password for the
root
user (administrator).
9. The installation is now complete.
If you need additional information, refer to the AXIS 231D/232D User’s Manual which is
available from the Axis web site at http://www.axis.com
Syntax:
arp -s <IP Address> <MAC Address> temp
ping -s 408 <IP address>
Example:
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
Summary of Contents for 231D
Page 45: ...Installazione di AXIS 231D 232D 45 ITALIANO ...
Page 46: ......