Adding Printers in Macintosh
34
AXIS OfficeBasic User’s Manual
Installation in Mac OS X using AppleTalk
This section describes setting up your print server for printing in the Mac
OS X.
1. Start
Print Center
(from
Go | Applications | Utilities => Print Center
) or
the
Printer Setup Utility
.
2. Select
Printers | Add Printer...
3. From the
Printer List
dialog, select
AppleTalk
.
4. Now, the port of your print server will appear in the list of available printers.
The port is shown as <host name>_<port>.
•
The <port> is USB1. Example: AXIS610282_USB1
•
The <port> is LPT1. Example: AXIS610282_LPT1
Select the print server port you want to use.
5. Select an appropriate printer driver for your printer from the
Printer Model
drop-down list. If the printer is not available in the list, select
Generic
. (Note:
Generic
is only used for postscript printers.)
You can also browse for a printer driver on your computer or network by
selecting
Other...
from the list.
6. Click
Add
to complete the installation.
Installation of LPR printing in MAC OS X
If you want to print using LPR, select:
1.
Printers | Add Printer
...
2. From the
Printer List
dialog, select
LPR printers using IP.
3. Enter the IP address or host name of the print server in the
LPR printer’s
Address
field. You must uncheck the
Use Default Queue on Server
check
box and enter a Queue Name:
•
Enter USB1
•
Enter LPT1
4. Choose a printer driver from the
Printer Model
list and click
Add
to finish.
