INSTRUCTION MANUAL
13
_____________________________________________________________________________________________________________________
9. Operation principles
1.
Before each measurement the balance should be properly zeroed, which is signalled by “
”
indicator. If the zero indication is not shown when the balance is unloaded, or "----" is displayed, press
the "
" key.
2.
The balance enables tare setting in the whole measuring range. It is performed by pressing "
T
"
key.
3.
Weighed mass should be placed in the platform centre.
Do not drop weighed objects on the platform.
Do not overload the balance over 20% of maximum load.
4.
The weighing result should be read during the " " indicator lighting, which indicates the result
stabilization.
5.
When there is no weighing, but the balance should be ready for operation, it may be switched off by I/
key. It causes the balance reading system deactivation end entering the standby mode. Balance turning
on is performed by pressing " I/ " key.
6.
Protect the balance from dust, aggressive dusts and liquids. For cleaning purposes use water and dry it.
