50
INSTRUCTION MANUAL
_____________________________________________________________________________________________________________________
To leave the function with clearing total register, select
totAL
function from menu and choose
tot oFF
option. Scale prints the communicate informing about clearing registers.
The form of receipt after each measurement:
Report form:
Note:
When the scale doesn’t have an internal clock, Date and Time do not ap
pear on printout.
Maximum number of measurements is 99 999.
Maximum total load 99 999 000d.
The weighing unit of the total value from the register (Total) is the same as the weighing unit stated on the
keypad or is 1000 times greater, what is signalled
by “o” indicator at the left of the display.
If the registered value is too big to be displayed, “E” communicate appears on the display.
If the number of
series is too high and cannot be displayed, “Err1”communicate appears on the display
Date: ... Time. ...
measurement no weight
measurement no weight
Date: ... Time. ...
TOTAL WEIGHT =
NUMBER OF SAMPLES =
AVERAGE VALUE =
