AXIS A9188 Network I/O Relay Module
Installation Guide - Full Reference
This full reference installation guide provides instructions for how to install AXIS A9188 Network
I/O Relay Module on your network.
•
For a quick reference guide, see the printed
AXIS A9188 Installation Guide – Quick
Reference
that is included in the package contents. The quick reference guide is also
available on
www.axis.com
•
For other aspects of using the product, see the
AXIS A9188 User Manual
available
on
www.axis.com
Requirements for Compliance with UL294 6th Edition
Requirements for Compliance with UL294 6th Edition
This section contains information and instructions required for UL compliance. To make sure the
installation is UL compliant, follow the instructions below in addition to the general information
and instructions provided throughout this document. In cases where pieces of information
contradict each other, the requirements for UL compliance always replace general information
and instructions.
Performance Levels for Access Control
This section contains performance level information required for UL 294 compliance.
Feature
Level
Destructive Attack Test
I
Line Security
I
Endurance
IV
Standby Power
I
Safety Instructions
•
The Axis product shall be installed and serviced by a factory trained professional.
•
The Axis product shall be installed within the protected premises (secured area).
•
The Axis product shall be mounted indoors. Outdoor use has not been evaluated or
approved by UL.
•
All interconnecting devices shall be UL Listed and Class 2 low-voltage power limited.
•
All wiring methods shall be performed in accordance with NFPA70, local codes and
authorities having jurisdiction.
9
Summary of Contents for A9188
Page 1: ...AXIS A9188 Network I O Relay Module Installation Guide Full Reference...
Page 4: ......
Page 8: ...8...
Page 29: ...29...
