Axis Ambarella A7LA50, Instruction Manual

15

MOUNTING

CAMERA SPECIFICATIONS 

The DVR6 camera is designed for easy & quick mounting to your windscreen with the 

adhesive pad. 

1) Mount the camera to the mounting bracket with power cable plugged into either the  

     mount or camera body.

2) Check for a suitable position on the windscreen with the camera powered on. 

5RWDWHWKHFDPHUDYHUWLFDOO\WRƮQGWKHEHVWPRXQWLQJORFDWLRQ

)LWDZHGJHLIQHFHVVDU\WRPRXQWDWDQRƬVHWORFDWLRQ6FUHZWKHZHGJHVWRWKH

     mount bracket or use the adhesive pads in the accessory bag. (M1.4x5mm screws  

    are also included in the accessory bag). 

4) Stick the adhesive sticker pad to the mount bracket or wedge and attach to your  

     windshield. Hold the mount for a few seconds to ensure good adhesion.

5) Power on the camera and check the camera display again. 

- To demount the camera, just slide the camera out from the mounting bracket. 

- To remove the mounting bracket from your windscreen, please use a thin cord with a  

   sawing motion to cut between the adhesive sticker and your windshield and pull the   

FRUGWREUHDNWKHPRXQWRƬIURP\RXUZLQGVKLHOG7KHQUHPRYHWKHVWLFNHUUHVLGXH

3OHDVHGRQoWEUHDNRƬWKHPRXQWEUDFNHWIURPZLQGVFUHHQZLWKDULJLGEDU7KLVPD\

   damage the mount bracket or your windscreen. 

- The recommended mounting location for the DVR6 is at the centre of the windscreen,  

   just behind the rear view mirror. This is usually a hidden location and will not hinder  

   safe driving.