Section 3: Basic Installation
AXIS 5470e/570/670e User’s Manual
40
Notes:
Using RARP in UNIX
Follow the instructions below to set the IP address using RARP.
AXIS 5470e/570
Ethernet Print Servers:
1. Append the following line to your Ethernet Address table. This is
typically located in the
/etc/ethers
file:
Example:
2. Update, if necessary, your host table and alias name databases, as
required by your system.
3. If it is not already running, start the RARP daemon. This is
typically performed using the
rarpd -a
command.
4. Restart the AXIS 5470e/570 to download the IP address.
Notes:
•
The
node address
is equal to the serial number, which can be found
on the underside label of the AXIS 670e.
•
The ARP command varies between different UNIX systems. Some BSD type
systems expect the host name and node address in reverse order.
•
When you execute the ping command for the first time, you may experience
a significantly longer response time tha
n usual.
<Ethernet address> <host name>
00:40:8c:10:00:86 npsname
•
The
Ethernet address
is equal to the serial number, which can be
found on the underside label of the AXIS 5470e/570.
•
If you are a IBM AIX user, you will probably not have access to a RARP
daemon. If this is the case, you can use either the ARP or BOOTP methods
instead.
Summary of Contents for AXIS 570
