Appendix B: The Parameter List
AXIS StorPoint CD User’s Manual
113
Appendix B
The Parameter List
This section describes how to update the AXIS StorPoint CD
configuration settings. It also includes the parameter list for the
StorPoint CD.
Editing the Configuration Parameters
Web Browser
If your network supports TCP/IP, you can display and edit the
StorPoint CD parameter list using any standard Web browser. The
Internet address must be set as described in “
Setup for TCP/IP
” on
page 20.
To access the StorPoint CD Home Page from your Web browser,
enter the URL of the StorPoint CD, i.e. the Internet address or the
host name, in the Location field.
AXIS WinPoint
Configuration Tool
In the Windows 95 and Windows NT environments, you can use the
AXIS WinPoint configuration tool for updating the configuration
settings. Refer to “
Setting Up - the AXIS WinPoint Utility
” on page 28
on how to install and access AXIS WinPoint.
Text Editor
The configuration settings for the AXIS StorPoint CD are stored in
the
config.ini
file located in the config folder. You can use your
preferred text editor to make updates to the file.
Submit the new settings to the StorPoint CD simply by saving the file.
To activate the new settings it is necessary to restart the StorPoint CD.
You can do this by setting the
Restart
parameter to
yes
.
Notes:
❏
When editing the file, be sure that the equal sign and the
parameter value is separated by a space.
❏
Do not remove the
[END]
marker from the file.
Summary of Contents for AXIS StorPoint CD
