Appendix B: The Parameter List
AXIS StorPoint CD User’s Manual
115
BOOTPEnable
= yes
Enables BOOTP Internet address setup.
RARPEnable
= yes
Enables RARP Internet address setup.
DHCPEnable
= yes
Enables DHCP Internet address setup.
DomainName
=
Name of the domain to which the StorPoint CD belongs.
PrimaryDNS
= 0.0.0.0
The Internet address of the primary DNS server. Used for
identifying computers with names instead of IP addresses.
SecondaryDNS
= 0.0.0.0
The Internet address of the secondary DNS server, should
the primary DNS server be unavailable or disconnected.
NTPServer
Name or Internet address for the NTP server.
[SMB]
EnableNetBEUI
= yes
Enables SMB over NetBIOS/NetBEUI.
EnableNBT
= yes
Enables SMB over NetBIOS/TCP/IP.
EnableWINS
= no
Enables WINS over NetBIOS/TCP/IP.
PrimaryWINSserver
= 0.0.0.0
The Internet address of the primary WINS server.
SecondaryWINSserver
= 0.0.0.0
The Internet address of the secondary WINS server, if
required.
NBTscopeID
=
Defines the NetBIOS scope to which the StorPoint CD
belongs.
Domain/GroupName
=
Name of the StorPoint CD workgroup in SMB. If not
specified, the StorPoint CD will appear in the folder that
comes first in alphabetical order.
ServerName
= AXISnnnnnn
The server name in the SMB environment. Default is
AXISnnnnnn
where
nnnnnn
are the last six digits of the serial
number.
NetBEUIFrameType = auto
If set to
auto
, 802.2 or dix will automatically be selected by
scanning the network. If required, the frame type can also be
set to either
802_2
or
dix
.
ShowAllShares
= yes
Allows the users to see the cd, config, root, and volumes
folders. If set to
no
, only the CD-ROMs are visible.
SecurityMode
= userLevel
Specifies the security mode used in SMB. Set to
userLevel
or
shareLevel
.
AuthenticationDomain
=
Name of the domain to which the controller used for
authenticating users in user-level security mode belongs. If left
empty, all users will have full access.
[NFS]
NFSEnable
= yes
Enables NFS.
DefaultUid
= -2
Default user id to be used when authenticating PCNFSD
clients. Disable by setting the parameter to
0
(zero).
PCNFSDAuthentServer
= 0.0.0.0
The Internet address of the server used for authentication of
PC users on the UNIX (NFS) network. The default
0.0.0.0
disables the function.
[HTTP]
HTTPEnable
= yes
Enables HTTP. Set to
no
to restrict users from accessing the
CD-ROMs from a Web browser.
EnableMediaAccess
= yes
Enables access to the inserted CD-ROMs. When set to
no
,
only administration is available from HTTP.
Parameter name
Value
Description
Summary of Contents for AXIS StorPoint CD
