Section 4: Setting Up - NetWare
AXIS StorPoint CD User’s Manual
43
❏
If schema extensions are not allowed in your NDS tree, you can
store the access rights in a file on a Novell file server. In this case,
you do not need Supervisor access rights. However, you must
specify the
NDSRightsStorage
and
NDSRightsFile
parameters
properly. After the NDS installation, you should also create and
assign access rights to a directory on the Novell file server.
Follow these steps to install the StorPoint CD as an NDS server:
1.
First you need to verify that the NDS tree is synchronized. To do
that, load
DSREPAIR
on the server in the NDS tree and select
Unattended full repair
. If the NDS tree is not synchronized,
do
not
continue the installation until you have solved the
problem.
2.
You can use a standard text editor to edit the configuration
parameters. From Windows Explorer or File Manager, locate the
StorPoint CD configuration file,
config.ini
file at
AXIS<nnnnnn>\config\config.ini
, where
<nnnnnn>
are the
last six digits of the serial number.
Alternatively, you can use the AXIS WinPoint Windows tool or a
Web browser to set the configuration parameters.
Note:
❏
On the Quick Installation web page, you will find an installation
wizard that guides you through the NDS installation.
Summary of Contents for AXIS StorPoint CD
