Section 4: Setting Up - NetWare
AXIS StorPoint CD User’s Manual
53
10.
Check Reconnect at logon if you wish to use the StorPoint CD
under the same drive letter the next time you start your computer.
11.
Click the OK button. The StorPoint CD is ready for use.
Windows for
Workgroups
1.
Start the File Manager and select Connect Network Drive… from
the Disk menu. If you also have Microsoft Network installed, you
may have to click the NetWare... button.
2.
Click the Select NetWare Connections button on the toolbar. A
screen similar to this is displayed:
3.
Select the entry for your new StorPoint CD. The default name is
AXIS<nnnnnn>_NW
, where
<nnnnnn>
are the last six digits of the
StorPoint CD serial number.
4.
Click the Login button.
5.
If you are using bindery mode, you will be prompted to enter your
user name and password, unless you are already logged in. Before the
StorPoint CD has been set up, all users have full access to it.
Summary of Contents for AXIS StorPoint CD
