Section 5: Setting Up - Microsoft and IBM Networks (SMB)
AXIS StorPoint CD User’s Manual
73
5.
In the Share/alias field, enter the name of the StorPoint CD
resource:
•
root
for root level access
•
cd
for cd folder access
• the volume name for access to an individual CD-ROM (for
example
cd_18881
)
6.
In the Local device name field, select a drive letter to map to.
7.
Click Create. The StorPoint CD is ready for use.
Note:
❏
The StorPoint CD folders will not be visible on the Desktop in
OS/2 versions prior to OS/2 WARP Connect. If you wish to use
an earlier version of OS/2, we recommend using third party NFS
software to connect to the StorPoint CD.
OS/2
If you do not have Peer for OS/2, the StorPoint CD can be mapped to
a drive letter using the
net use
command. Follow these steps:
1.
Open an OS/2 window.
2.
At the OS/2 prompt, type:
net use <drive letter>: \\AXIS<nnnnnn>\<folder
where
<nnnnnn>
are the six last digits of your StorPoint CD serial
number and
<folder>
is the StorPoint CD folder you want to map.
3.
To make the connections permanent, create or edit your
startup.cmd
file to include your net use commands.
Summary of Contents for AXIS StorPoint CD
