AXIS Camera Station Administration
AXIS Camera Station User’s Manual
37
Views
Under the
Views tab, you define which camera is displayed in which position, in
each different view.
Example: Define camera views
1. Select a view by clicking a button on the left side of the window. The view
is now displayed, with its position numbered.
2. Click to select the position you wish to define for a certain camera. The
selected position is marked by a red border.
3. From the drop-down list of available cameras, select the camera to display
in this position. Repeat steps 2 and 3 for all cameras.
4. The quality of the video feed can be improved by increasing the
Framerate
and lowering the compression value in
Image Quality (Compression).
Default View
Specify the default view (0, 4, 6, 9, 10, 13 or 16) to display when AXIS Camera
Station is started. If this is set to 0, no live images are shown. The controls for
event search, etc. are still visible.
1. Select
3. Select camera
5. Click
OK to save and exit.
Example:
To configure 4 cameras,
select
To configure 8 cameras,
select
view according
2. Select camera position
for camera
4. Repeat steps 2 and 3 for all cameras.
to the number of
cameras you want to
configure.
