12
3.6. No LCD Monitor
If the DVR is not connected to any monitors, it will remind the customer of the exception by
Buzzer alarm.
Buzzer warning functions are as follows:
• No matter what types of alarm event occur (including Alarm recording 1~8, Motion detection
recording, G-force recording, Speed recording and Panic button recording), the Buzzer alarm will last
for a while.
• When the Buzzer alarms intermittently, it means that the DVR is unable to record currently.
Modes of intermittent alarm and their corresponding indications are as follows:
a. The electronic lock is open: one long whistle and one short whistles.
b. Diskless: one long whistle and two short whistles.
c. Disk file system exception: one long whistle and three short whistles.
d. The disks are normal but the alarm video files fill the disks: two short whistles and one
short whistles.
e. The disks are normal, but DVR is not recording: two short whistles and three short whistles.
4. Connection - Front Panel
1. Camera cable input
2. Wifi Connector
3. GPS Connector
4. Cellular Connector, TX/RX - N/A
5. Power Input (9-36V)
6. Alarm-In & Alarm-Out
7. RS485 & RS232
8. Debug port
9. USB3.0 connector
10. 6pin CVBS video monitor output
Summary of Contents for DV425
