background image

18

4.7. Panic Button (Optional) 

 

Overview 

 

The LEDs are used to show the device’s working status. But when the device is installed in 

the vehicle, it is not easy to check the LED on the front panel. Each of the LED indicates the 

corresponding status. Furthermore, the panic button on the panel make it easier to trigger alarm for 

emergency or bookmarking a manual event.

Pin Definition

 

 

  

 

 

2*5 PIN/3.0 interface connect to the interface on panic button.

 

LED

LED

Color

ON

OFF

VLoss

Amber

Any of the cameras 

have no signal alarm

Normal Operation

Rec

Soft green

Recording Normal 

driving

Not recording

GPS

Amber

GPS cannot latch

Normal Operation

Mem

Red

Storage Alarm or no 

Storage device

Normal Operation

Comm

Amber

Device is not 

connected to server

Normal operation 

or device is not 

connected to server if 

this feature is disabled

Power

Pale Blue

Device has power

Device does not have 

power

Error

Red

Error with device

Normal Operation

Event

Red

Event-based 

Recording (remains lit 

during Event)

Normal Operation

 

Summary of Contents for DV425





























































Reviews: