AXIS F41 Main Unit
Events
•
Send SNMP Trap
– Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured
under
System Options
>
Network
>
SNMP
.
•
Send Video Clip
– Send a video clip to a recipient.
•
Status LED
– Flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and configuration.
•
WDR Mode
– The WDR Mode can be turned on or off when the action rule is triggered.
Add Recipients
The product can send media files and messages to notify users about events. Before the product can send media files or notification
messages, you must define one ore more recipients. For information about available options, see
.
To add a recipient:
1. Go to
Events > Recipients
and click
Add
.
2. Enter a descriptive name.
3. Select a recipient
Type
.
4. Enter the information needed for the recipient type.
5. Click
Test
to test the connection to the recipient.
6. Click
OK
.
Recipient Types
The following recipients are available:
Recipient
Use with action
Notes
Send Images
Send Notification
Send Video Clip
An email recipient can contain multiple email addresses.
FTP
Send Images
Send Video Clip
SFTP
Send Images
Send Video Clip
Encrypted file transfer using SSH File Transport Protocol
(SFTP). SFTP is a more secure method than FTP but file
transfer might be slower, especially for large files such as high
resolution video.
Specify login information for the SFTP server and the server’s
public key MD5 fingerprint (32 hexadecimal digits).
The SFTP recipient supports SFTP servers using SSH-2 with
RSA and DSA host key types. RSA is the preferred method. To
use DSA, disable the RSA key on the SFTP server.
HTTP
Send Images
Send Notification
Send Video Clip
40
