Axis Nitris and Axis Fuel |22| english
Axis Nitris and Axis Fuel |23| english
4. Remove 5 screws on the back
of shaver.
5. Gently pull the two halves of the
shaver body apart.
6. Pull the batteries out from the
shaver.
7. Cut the wires that connect the
batteries (4 wires for batteries) with
nippers.
WARNING! To avoid the risk of bursting and the subsequent release of
toxic materials, never mutilate or place the batteries in fire. To prevent
accidental burns, avoid short-circuiting the batteries. Dispose of batter-
ies in accordance with local disposal/recycling requirements.
To Replace Foil Screens
IMPORTANT: For the best shaving performance and results, we recom-
mend that you replace the shaver’s foil screens every six months and
inner cutters at least once a year.
Skin irritation or a deterioration of shave qual-
ity typically indicates that your foils need to be
replaced. Replacement intervals will vary with
individual use and hair types.
(Please refer to the “Ordering Replacement Parts”
section)
1. Remove the foil screen assembly by pressing
the release buttons on both sides of the shaver
and lifting off the assembly off. (fig. 1)
2. The Outer Foils are mounted to the Outer
Foil Frame. Release the Foil Frame from the Foil
Frame Base by gently sliding a fingernail between
Fig. 1
Fig. 3
Fig. 2
Fig. 2
Fig. 1
Fig. 1
Fig. 3
Fig. 2
Fig. 2
Fig. 1
Fig. 1
Fig. 3
Fig. 2
Fig. 2
Fig. 1
Fig. 1
3
2
1
Summary of Contents for fuel AX3335
Page 46: ......
