Axis P3715-PLVE User Manual Download

Page: 25 / 26

AXIS P3715-PLVE Network Camera

Specifications

To find the latest version of the product’s datasheet, go to the product page at

axis.com

and locate

Support & Documentation

Product overview

LED indicators

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports SD/SDHC/SDXC cards.

For SD card recommendations, see

axis.com

SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered

trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button

The control button is used for:

•

Resetting the product to factory default settings. See

Reset to factory default settings on page 21

Intrusion alarm switch

Use the intrusion alarm switch to get a notification when someone opens the device’s housing. Set up an action rule, for example
recording or notification, to perform an action when the switch is activated. See .

Connectors

Network connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

Summary of Contents for P3715-PLVE



























Search results

Summary of Contents for P3715-PLVE

Reviews:

Related manuals for P3715-PLVE

Brands by name

Popular brands

Axis P3715-PLVE, User Manual

Search results

Summary of Contents for P3715-PLVE

Reviews:

Related manuals for P3715-PLVE

Brands by name

Popular brands